1945-1964 Jeep CJ2A, 3A,and early 3B up to serial # 39838 "Under the Drivers" seat fuel tank. The sending unit is installed with 5 screws and has a straight fuel filler neck (it does not angle back towards the rear tire). The fuel pickup tube is installed on top of the tank. An in-line fuel filter is required. This fuel tank does not have a drain plug. Includes a new 5-hole sending unit gasket. Approx. dimensions: 25" x 18 1/2" x 6 1/2". Replaces #: 640685. UPC #: 810160410126.

Additional picture: pic 2

Sending Unit # CJSU-2
Top Strap # CJGTS-3
Filler Plate Grommet # CJFPG-1
Filler Plate # CJFP-1
Non-Vented Gas Cap # CJGC-2
Gasket # CJOR-5
6-Volt Fuel Gauge # CJFG-1
12-Volt Fuel Gauge # CJFG-2

Sending Unit # CJSU-2
Top Strap # CJGTS-3
Filler Plate Grommet # CJFPG-1
Filler Plate # CJFP-1
Non-Vented Gas Cap# CJGC-2
Gasket # CJOR-5
6-Volt Fuel Gauge # CJFG-1
12-Volt Fuel Gauge # CJFG-2

Sending Unit # CJSU-3
Strap # CJGTS-3
Filler Plate Grommet # CJFPG-1
Filler Plate # CJFP-1
Non-Vented Gas Cap# CJGC-2
Gasket # CJOR-6

Sending Unit # CJSU-3
Top Strap # CJGTS-3
Filler Plate Grommet # CJFPG-1
Filler Plate # CJFP-1
Non-Vented Gas Cap# CJGC-2
Gasket # CJOR-6

1955-1972 JeepCJ5 and CJ6. This is an "Under the Drivers" seat fuel tank. The sending unit is installed with 6 screws and has an angled fuel filler neck (towards the rear tire). The fuel pickup tube is installed on top of the tank. An in-line fuel filter is required. This tank does not have a drain plug. Includes a new 6-hole sending unit gasket. Approx. dimensions: 25" x 18 1/2" x 6 1/2". Replaces #: 912008. UPC #: 810160410164.

Additional picture: pic 2

*This fuel tank will work with the V6 engine and the 6 screw send unit installation method only. This tank does not replace the lock ring style sending unit installation method.

Sending Unit # CJSU-3
Top Strap # CJGTS-3
Filler Plate Grommet # CJFPG-1
Filler Plate # CJFP-1
Non-Vented Gas Cap# CJGC-2
Gasket # CJOR-6

1955-1972 JeepCJ5 and CJ6. This is an "Under the Passengers" seat fuel tank. The sending unit is installed with 6 screws and has an angled fuel filler neck (towards the rear tire). The fuel pickup tube is installed on top of the tank. An in-line fuel filter is required. This tank does not have a drain plug. Includes a new 6-hole sending unit gasket. Approx. dimensions: 25" x 18 1/2" x 6 1/2". Replaces #: 912008-RH. UPC #: 810160410171.

Additional picture: pic 2

*This fuel tank will work with the V6 engine and the 6 screw send unit installation method only. This tank does not replace the lock ring style sending unit installation method.

Sending Unit # CJSU-3
Top Strap # CJGTS-3
Filler Plate Grommet # CJFPG-1
Filler Plate # CJFP-1
Non-Vented Gas Cap# CJGC-2
Gasket # CJOR-6

1965-1972 Jeep CJ5 and CJ6. This is an "Under the Drivers" seat fuel tank. The sending unit is installed with a lock ring and has an angled filler neck (towards the rear tire). The fuel pick-up tube is on the sending unit. An in-line fuel filter is required. Includes a new lock ring and a new gasket. Approx. dimensions: 25" x 18 1/2" x 6 1/2". Replaces #: 937996. UPC #: 810160410188.

Additional picture: pic 2

*This fuel tank will work with the I4 and V6 engines but requires the correct lock ring style installation method sending unit.

I4 Sending Unit w/o Return Line # CJSU-4
V6 Sending Unit w/ Return Line # CJSU-6
Top Strap # CJGTS-3
Filler Plate Grommet # CJFPG-1
Filler Plate # CJFP-1
Non-Vented Gas Cap # CJGC-2
Lock Ring # FMLR-1
Gasket # FMOR-1

1965-1972 Jeep CJ5 and CJ6. This is an "Under the Passengers" seat fuel tank. The sending unit is installed with a lock ring and has an angled filler neck (towards the rear tire). The fuel pick-up tube is on the sending unit. An in-line fuel filter is required. Includes a new lock ring and a new gasket. Approx. dimensions: 25" x 18 1/2" x 6 1/2". Replaces #: 937996-RH. UPC #: 810160410195.

Additional picture: pic 2

*This fuel tank will work with the I4 and V6 engines but requires the correct lock ring style installation method sending unit.

I4 Sending Unit w/o Return Line # CJSU-4
V6 Sending Unit w/ Return Line # CJSU-6
Top Strap # CJGTS-3
Filler Plate Grommet # CJFPG-1
Filler Plate # CJFP-1
Non-Vented Gas Cap # CJGC-2
Lock Ring # FMLR-1
Gasket # FMOR-1

1972-1977 Jeep CJ5, 1972-1975 Jeep CJ6 and 1976-1977 Jeep CJ7 15-Gal. behind the rear axle fuel tank. This fuel tank requires the 15-Gal. OEM style skid plate*, top strap, end straps, our fuel filler/vent hoses** for installation. Includes a new lock ring and a new gasket. Approx. dimensions: 23" x 16" x 10". Replaces #: 5355314 and 8127698. UPC #: 810160410201.

Additional picture: pic 2

*The skid plate might require some custom installation work when bolting to the frame of the vehicle.

**When installig our 0050 or 0050XL fuel tanks, the best fuel filler and fuel vent hoses are our CJFH-2 and CJVH-2 regardless of the year. Our manufacturing process does not allow for a long vent neck so the CJVH-3 and CJVH-4 hoses are too short when attached to the matching fuel filler hose.

Sending Unit # CJSU-1
Top Strap # CJGTS-1
End Straps # CJGTSE-1
In-Tank Fuel filter # CJFF-1
Filler Hose('77) # CJFH-2
Vent Hose('77) # CJVH-2
Filler Hose('70-'75) # CJFH-3
Vent Hose('70-'75) # CJVH-3
Filler Hose('76) # CJFH-4
Vent Hose('76) # CJVH-4
Filler Hose Nipple # CJFHN-1
Filler Plate Grommet # CJFPG-2
Skid Plate # CJSP-1
Liquid Control Valve Assembly # JLCV-1
Liquid Valve Connector # YJRVC-1
Liquid Valve # EMSV-1
Fresh Air Box # CJAB-2
Drain Hose # CJABH-1
Drain Hose Cap # CJABH-3C
Lock Ring # FMLR-1
Gasket # FMOR-1

1972-1973 Jeepster Commando C101 15-Gal. behind the rear axle fuel tank. This fuel tank requires the 15-Gal. OEM style skid plate*, top strap, end straps for installation. Includes a new lock ring and a new gasket. Approx. dimensions: 23" x 16" x 10". Replaces #: . UPC #: 810160410218.

Additional picture: pic 2

*The skid plate might require some custom installation work when bolting to the frame of the vehicle.

Sending Unit # CJSU-1
Top Strap # CJGTS-1
End straps # CJGTSE-1
In-Tank Fuel filter # CJFF-1
Filler hose nipple # CJFHN-1
Filler plate grommet # CJFPG-2
Skid plate # CJSP-1
Liquid Control Valve Assembly # JLCV-1
Liquid Valve Connector # YJRVC-1
Liquid Valve # EMSV-1
Fresh Air Box # CJAB-2
Drain Hose # CJABH-1
Drain hose cap # CJABH-3C
Lock ring # FMLR-1
Gasket # FMOR-1

1971-1973 Jeep DJ 15-Gal. behind the rear axle fuel tank(oversized 0050). This fuel tank requires the 15-Gal. OEM style skid plate*, top strap, end straps for installation. Includes a new lock ring and a new gasket. Approx. dimensions: 23" x 16" x 10". Replaces #: . UPC #: 810160410225.

Additional picture: pic 2

*The skid plate might require some custom installation work when bolting to the frame of the vehicle.

Sending Unit # CJSU-1
Top Strap # CJGTS-1
End Straps # CJGTSE-1
In-Tank Fuel Filter # CJFF-1
Filler Hose Nipple # CJFHN-1
Filler Plate Grommet # CJFPG-2
Skid Plate # CJSP-1
Liquid Control Valve Assembly # JLCV-1
Liquid Valve Connector # YJRVC-1
Liquid Valve # EMSV-1
Fresh Air Box # CJAB-2
Drain Hose # CJABH-1
Drain Hose Cap # CJABH-3C
Lock Ring # FMLR-1
Gasket # FMOR-1

1972-1977 Jeep CJ5, 1972-1975 Jeep CJ6 and 1976-1977 Jeep CJ7 21-Gal. behind the rear axle fuel tank. Our 21-Gal. fuel tank requires the 15-Gal. OEM style skid plate*, end straps, our fuel filler/vent hoses** for installation. An in-line fuel filter is required. Includes a new longer top strap, sending unit, skid plate extensions*, lock ring and a new gasket. Approx. dimensions: 23" x 16" x 15". Replaces #: 5355314 and 8127698. UPC #: 810160410232.

Additional picture: pic 2
Instruction Sheet: XL Tank Sheet

*The skid plate extensions are used to lower the skid plate to accomodate the taller fuel tank. Installing the skid plate might require some custom installation work when bolting to the frame of the vehicle.

**When installig our 0050 or 0050XL fuel tanks, the best fuel filler and fuel vent hoses are our CJFH-2 and CJVH-2 regardless of the year. Our manufacturing process does not allow for a long vent neck so the CJVH-3 and CJVH-4 hoses are too short when attached to the matching fuel filler hose.

1978-1983 Jeep CJ5, 1978-1986 Jeep CJ7 and 1981-1986 Jeep CJ8 Scrambler 15-Gal.* fuel tank. Includes a new lock ring and a new gasket. Approx. dimensions: 23" x 16" x 10". Replaces #: 8128585. UPC #: 810160410249.

Additional picture: pic 2
Tank/Fuel System Diagram: Diagram

*From 1981-1986, Jeep offered a 20-Gal. OEM "plastic" fuel tank in the CJ's. Our 15-Gal. plastic fuel tank does not directly replace the OEM 20-Gal. plastic fuel tank. A new 15-Gal. OEM style skid plate, sending unit, top strap, end straps, liquid control valve assembly, fuel filler and vent hoses are required to install our 15-Gal. plastic tank when replacing the OEM 20-Gal. plastic fuel tank..

Sending unit # CJSU-1
Top Strap # CJGTS-1
End straps # CJGTSE-1
Fuel filter # CJFF-1
Filler hose('78-'86) # CJFH-1
Vent hose('78-'86) # CJVH-1
CJ8 Filler hose('81-'82) # CJFHCJ8-15A
CJ8 Vent hose('81-'82) # CJVHCJ8-15A
CJ8 Filler hose('83-'86) # CJFHCJ8-15
CJ8 Vent hose('83-'86) # CJVHCJ8-15
Skid plate # CJSP-1
Filler neck # CJFN-1
Steering Column Gasket # JSCSEAL-1
Bolts # JSCBOLTS-1
Liquid Control Valve Assembly #JLCV-1
Liquid Valve Connector # YJRVC-1
Liquid Valve # EMSV-1
Air Box Drain Hose # CJABH-3
Air Box Drain hose cap # CJABH-3C
Lock ring # FMLR-1
Gasket # FMOR-1

1978-1983 Jeep CJ5, 1978-1986 Jeep CJ7 21-Gal.** fuel tank(oversized 0051). Our 21-Gal. fuel tank requires the 15-Gal. OEM style skid plate and end straps for installation. An in-line fuel filter is required. Includes a new longer top strap, sending unit, skid plate extensions*, lock ring and a new gasket. Approx. dimensions: 23" x 16" x 15". Replaces #: 8128585. UPC #: 810160410256.

Additional pictures: pic 2 pic 3
Instruction Sheet: XL Tank Sheet
Tank/Fuel System Diagram: Diagram

*The skid plate extensions are used to lower the skid plate to accomodate the taller fuel tank.

**From 1981-1986, Jeep offered a 20-Gal. OEM "plastic" fuel tank in the CJ's. Our 21-Gal. plastic fuel tank does not directly replace the OEM 20-Gal. plastic fuel tank. A new 15-Gal. OEM style skid plate, end straps, liquid control valve assembly, fuel filler and vent hoses are required to install our 21-Gal. plastic tank when replacing the OEM 20-Gal. plastic fuel tank.

** This tank will NOT physically fit in a CJ8 Scrambler - too tall.**

Sending Unit(w/o F.I.) # YJSU-2
Sending Unit(w/ F.I.) # YJSU-1
Sending Unit(w/ F.I.,w/ pump) # YJSU-1P
Electric fuel pump # EFPK-3210
Top Strap # CJGTS-1
End Straps # CJGTSE-1
Filler Hose # YJFH-15
Vent Hose # YJVH-15
Skid Plate # CJSP-1
EMS Valve for YJRVC-1 # EMSV-1
Roll Over Valve Connector # YJRVC-1
Steering Column Gasket # JSCSEAL-1
Bolts # JSCBOLTS-1
Air Box Drain Hose # YJABH-1
Air Box Drain Hose Cap # YJABH-1C
Lock Ring # GMLR-1
Gasket # GMOR-1

1987-1990 Jeep Wrangler YJ 20-Gal. fuel tank and 1991-1995** Jeep Wrangler YJ 15-Gal. fuel tank with a rectangle sending unit hole and built-in fuel bowl. This tank will only replace the OEM plastic style tank with or without fuel injection. Includes a new rectangle sending unit gasket, (8)bolts and (2) upper straps with bolts, nuts and split washers. Approx. dimensions: 32" x 17 1/2" x 11 1/4". UPC #: 810160410270.

*This tank will not replace the 15-Gal. OEM metal style tank. To the best of our knowledge, this tank will directly replace domestic model tank #'s 52002633 & 52018287. This tank will NOT directly replace export model #'s 52018779, 52019226, 52007258, 52002622 or 52020522(Egypt). If the YJ has an export model tank, a new skid plate and sending unit are required and we recomment replacing the fuel filler and vent hoses. The hoses may need to be spliced and elongated as well.

**The 1991-1995 Jeep Wrangler YJ's used the same 20-Gal. fuel tank used from 1987-1990 but Jeep inserted a pipe into the vent neck to reduce the fuel tank capacity to 15-Gal. Please call with any questions.

***Some early 1987-1990 Jeep Wrangler YJ 20-Gal. plastic fuel tanks had an open ended skid plate without the rolled heat shield over the exhaust pipe, we recommend replacing the skid plate as an exhaust/heat shield safety precaution. We also recommend replacing the fill and vent hoses to prevent possible fitment issues with the new skid plate.

Pictures of 0065 on YJSP-20: pic 1 pic 2 pic 3 pic 4

1997-2002 Jeep Wrangler TJ 19-Gal. fuel tank. Includes (2) new emission valves, (2) grommets and a pair of upper straps. Approx. dimensions: 34" x 17 1/2" x 12 1/2". Our tank will ONLY replace OEM tank # 52018768AE. UPC #: 810160410287.

Sending unit Module Installed picture: pic 1

*Our tank does not come with a sending unit gasket or sending unit module. Installation of the sending unit module is different than the original screw on nut. Picture #1(coming soon) shows a sending unit module installed